123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449 |
- #!/usr/bin/env bash
- # tools/mkexport.sh
- #
- # Copyright (C) 2011-2012, 2014, 2016, 2019 Gregory Nutt. All rights reserved.
- # Author: Gregory Nutt <gnutt@nuttx.org>
- #
- # Redistribution and use in source and binary forms, with or without
- # modification, are permitted provided that the following conditions
- # are met:
- #
- # 1. Redistributions of source code must retain the above copyright
- # notice, this list of conditions and the following disclaimer.
- # 2. Redistributions in binary form must reproduce the above copyright
- # notice, this list of conditions and the following disclaimer in
- # the documentation and/or other materials provided with the
- # distribution.
- # 3. Neither the name NuttX nor the names of its contributors may be
- # used to endorse or promote products derived from this software
- # without specific prior written permission.
- #
- # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- # FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- # COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- # INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- # BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- # OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- # AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- # POSSIBILITY OF SUCH DAMAGE.
- #
- # Get the input parameter list
- USAGE="USAGE: $0 [-d] [-z] [-u] [-t <top-dir> [-x <lib-ext>] [-a <apps-dir>] [-m <make-exe>] -l \"lib1 [lib2 [lib3 ...]]\""
- unset TOPDIR
- unset LIBLIST
- unset TGZ
- unset APPDIR
- unset BOARDDIR
- USRONLY=n
- LIBEXT=.a
- while [ ! -z "$1" ]; do
- case $1 in
- -a )
- shift
- APPDIR="$1"
- ;;
- -b )
- shift
- BOARDDIR="$1"
- ;;
- -d )
- set -x
- ;;
- -l )
- shift
- LIBLIST=$1
- ;;
- -m )
- shift
- MAKE="$1"
- ;;
- -t )
- shift
- TOPDIR=$1
- ;;
- -u )
- USRONLY=y
- ;;
- -x )
- shift
- LIBEXT=$1
- ;;
- -z )
- TGZ=y
- ;;
- -h )
- echo $USAGE
- exit 0
- ;;
- * )
- echo "Unrecognized argument: $1"
- echo $USAGE
- exit 1
- ;;
- esac
- shift
- done
- # Check arguments
- if [ -z "${TOPDIR}" -o -z "${LIBLIST}" ]; then
- echo "MK: Missing required arguments"
- echo $USAGE
- exit 1
- fi
- if [ ! -d "${TOPDIR}" ]; then
- echo "MK: Directory ${TOPDIR} does not exist"
- exit 1
- fi
- # Check configuration
- # Verify that we have Make.defs, .config, and .version files.
- if [ ! -f "${TOPDIR}/Make.defs" ]; then
- echo "MK: Directory ${TOPDIR}/Make.defs does not exist"
- exit 1
- fi
- if [ ! -f "${TOPDIR}/.config" ]; then
- echo "MK: Directory ${TOPDIR}/.config does not exist"
- exit 1
- fi
- if [ ! -f "${TOPDIR}/.version" ]; then
- echo "MK: File ${TOPDIR}/.version does not exist"
- exit 1
- fi
- # Check if the make environment variable has been defined
- if [ -z "${MAKE}" ]; then
- MAKE=`which make`
- fi
- # Get the version string
- source "${TOPDIR}/.version"
- if [ ! -z "${CONFIG_VERSION_STRING}" -a "${CONFIG_VERSION_STRING}" != "0.0" ]; then
- VERSION="-${CONFIG_VERSION_STRING}"
- fi
- # Create the export directory
- EXPORTSUBDIR="nuttx-export${VERSION}"
- EXPORTDIR="${TOPDIR}/${EXPORTSUBDIR}"
- # If the export directory already exists, then remove it and create a new one
- if [ -d "${EXPORTDIR}" ]; then
- echo "MK: Removing old export directory"
- rm -rf "${EXPORTDIR}"
- fi
- # Remove any possible previous results
- rm -f "${EXPORTDIR}.tar"
- rm -f "${EXPORTDIR}.zip"
- rm -f "${EXPORTDIR}.tar.gz"
- # Create the export directory and some of its subdirectories
- mkdir "${EXPORTDIR}" || { echo "MK: 'mkdir ${EXPORTDIR}' failed"; exit 1; }
- mkdir "${EXPORTDIR}/startup" || { echo "MK: 'mkdir ${EXPORTDIR}/startup' failed"; exit 1; }
- mkdir "${EXPORTDIR}/libs" || { echo "MK: 'mkdir ${EXPORTDIR}/libs' failed"; exit 1; }
- mkdir "${EXPORTDIR}/scripts" || { echo "MK: 'mkdir ${EXPORTDIR}/scripts' failed"; exit 1; }
- mkdir "${EXPORTDIR}/tools" || { echo "MK: 'mkdir ${EXPORTDIR}/tools' failed"; exit 1; }
- if [ "X${USRONLY}" != "Xy" ]; then
- mkdir "${EXPORTDIR}/arch" || { echo "MK: 'mkdir ${EXPORTDIR}/arch' failed"; exit 1; }
- fi
- # Copy the .config file
- cp -a "${TOPDIR}/.config" "${EXPORTDIR}/.config" ||
- { echo "MK: Failed to copy ${TOPDIR}/.config to ${EXPORTDIR}/.config"; exit 1; }
- # Copy the Make.defs files
- cp -a "${TOPDIR}/Make.defs" "${EXPORTDIR}/Make.defs" ||
- { echo "MK: Failed to copy ${TOPDIR}/Make.defs to ${EXPORTDIR}/Make.defs"; exit 1; }
- # Extract information from the Make.defs file. A Makefile can do this best
- ${MAKE} -C "${TOPDIR}/tools" -f Makefile.export TOPDIR="${TOPDIR}" EXPORTDIR="${EXPORTDIR}"
- source "${EXPORTDIR}/makeinfo.sh"
- rm -f "${EXPORTDIR}/makeinfo.sh"
- rm -f "${EXPORTDIR}/Make.defs"
- # Verify the build info that we got from makeinfo.sh
- if [ ! -d "${ARCHDIR}" ]; then
- echo "MK: Directory ${ARCHDIR} does not exist"
- exit 1
- fi
- # Copy the depends script
- cp "${TOPDIR}/tools/mkdeps.c" "${EXPORTDIR}/tools/."
- cp "${TOPDIR}/tools/incdir.c" "${EXPORTDIR}/tools/."
- # Copy the default linker script
- cp -f "${TOPDIR}/binfmt/libelf/gnu-elf.ld" "${EXPORTDIR}/scripts/."
- # Copy the board config script
- if [ -f "${BOARDDIR}/scripts/Config.mk" ]; then
- cp -f "${BOARDDIR}/scripts/Config.mk" "${EXPORTDIR}/scripts/."
- fi
- # Is there a linker script in this configuration?
- if [ "X${USRONLY}" != "Xy" ]; then
- # LDPATH can contain multiple files.
- # The "Copy additional ld scripts" step might copy a file multiple times.
- for LDSCRIPT in ${LDPATH}; do
- # Apparently so. Verify that the script exists
- if [ ! -f "${LDSCRIPT}" ]; then
- echo "MK: File ${LDSCRIPT} does not exist"
- exit 1
- fi
- # Copy the linker script
- cp -p "${LDSCRIPT}" "${EXPORTDIR}/scripts/." || \
- { echo "MK: cp ${LDSCRIPT} failed"; exit 1; }
- # Copy additional ld scripts
- LDDIR="$(dirname "${LDSCRIPT}")"
- for f in "${LDDIR}"/*.ld ; do
- [ -f "${f}" ] && cp -f "${f}" "${EXPORTDIR}/scripts/."
- done
- done
- fi
- # Save the compilation options
- echo "ARCHCFLAGS = ${ARCHCFLAGS}" >"${EXPORTDIR}/scripts/Make.defs"
- echo "ARCHCPUFLAGS = ${ARCHCPUFLAGS}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "ARCHCXXFLAGS = ${ARCHCXXFLAGS}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "ARCHPICFLAGS = ${ARCHPICFLAGS}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "ARCHWARNINGS = ${ARCHWARNINGS}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "ARCHWARNINGSXX = ${ARCHWARNINGSXX}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "ARCHOPTIMIZATION = ${ARCHOPTIMIZATION}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "CROSSDEV = ${CROSSDEV}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "CC = ${CC}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "CXX = ${CXX}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "CPP = ${CPP}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "LD = ${LD}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "AR = ${AR}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "NM = ${NM}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "STRIP = ${STRIP}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "OBJCOPY = ${OBJCOPY}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "OBJDUMP = ${OBJDUMP}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "NXFLATLDFLAGS1 = ${NXFLATLDFLAGS1}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "NXFLATLDFLAGS2 = ${NXFLATLDFLAGS2}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "OBJEXT = ${OBJEXT}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "LIBEXT = ${LIBEXT}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "EXEEXT = ${EXEEXT}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "HOSTCC = ${HOSTCC}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "HOSTINCLUDES = ${HOSTINCLUDES}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "HOSTCFLAGS = ${HOSTCFLAGS}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "HOSTLDFLAGS = ${HOSTLDFLAGS}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "HOSTEXEEXT = ${HOSTEXEEXT}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "LDNAME = ${LDNAME}" >>"${EXPORTDIR}/scripts/Make.defs"
- # Additional compilation options when the kernel is built
- if [ "X${USRONLY}" != "Xy" ]; then
- echo "EXTRA_LIBS = ${EXTRA_LIBS}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "EXTRA_OBJS = ${EXTRA_OBJS}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "HEAD_OBJ = ${HEAD_OBJ}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "LDENDGROUP = ${LDENDGROUP}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "LDFLAGS = ${LDFLAGS}" >>"${EXPORTDIR}/scripts/Make.defs"
- echo "LDSTARTGROUP = ${LDSTARTGROUP}" >>"${EXPORTDIR}/scripts/Make.defs"
- fi
- # Copy the system map file(s)
- if [ -r ${TOPDIR}/System.map ]; then
- cp -a "${TOPDIR}/System.map" "${EXPORTDIR}/."
- fi
- if [ -r ${TOPDIR}/User.map ]; then
- cp -a "${TOPDIR}/User.map" "${EXPORTDIR}/."
- fi
- # Copy the NuttX include directory (retaining attributes and following symbolic links)
- cp -LR -p "${TOPDIR}/include" "${EXPORTDIR}/." || \
- { echo "MK: 'cp ${TOPDIR}/include' failed"; exit 1; }
- # Copy the startup object file(s)
- ${MAKE} -C ${ARCHDIR} export_startup TOPDIR=${TOPDIR} EXPORT_DIR="${EXPORTDIR}"
- # Copy architecture-specific header files into the arch export sub-directory.
- # This is tricky because each architecture does things in a little different
- # way.
- #
- # First copy any header files in the architecture src/ sub-directory (some
- # architectures keep all of the header files there, some a few, and others
- # none
- cp -f "${ARCHDIR}"/*.h "${EXPORTDIR}"/arch/. 2>/dev/null
- # Then look a list of possible places where other architecture-specific
- # header files might be found. If those places exist (as directories or
- # as symbolic links to directories, then copy the header files from
- # those directories into the EXPORTDIR
- if [ "X${USRONLY}" != "Xy" ]; then
- ARCH_HDRDIRS="arm armv7-m avr avr32 board common chip mips32"
- for hdir in $ARCH_HDRDIRS; do
- # Does the directory (or symbolic link) exist?
- if [ -d "${ARCHDIR}/${hdir}" -o -h "${ARCHDIR}/${hdir}" ]; then
- # Yes.. create a export sub-directory of the same name
- mkdir "${EXPORTDIR}/arch/${hdir}" || \
- { echo "MK: 'mkdir ${EXPORTDIR}/arch/${hdir}' failed"; exit 1; }
- # Then copy the header files (only) into the new directory
- cp -f "${ARCHDIR}"/${hdir}/*.h "${EXPORTDIR}"/arch/${hdir}/. 2>/dev/null
- # Most architectures have low directory called "hardware" that
- # holds the header files
- if [ -d "${ARCHDIR}/${hdir}/hardware" ]; then
- # Yes.. create a export sub-directory of the same name
- mkdir "${EXPORTDIR}/arch/${hdir}/hardware" || \
- { echo "MK: 'mkdir ${EXPORTDIR}/arch/${hdir}/hardware' failed"; exit 1; }
- # Then copy the header files (only) into the new directory
- cp -f "${ARCHDIR}"/${hdir}/hardware/*.h "${EXPORTDIR}"/arch/${hdir}/hardware/. 2>/dev/null
- fi
- fi
- done
- # Copy OS internal header files as well. They are used by some architecture-
- # specific header files.
- mkdir "${EXPORTDIR}/arch/os" || \
- { echo "MK: 'mkdir ${EXPORTDIR}/arch/os' failed"; exit 1; }
- OSDIRS="clock environ errno group init irq mqueue paging pthread sched semaphore signal task timer wdog"
- for dir in ${OSDIRS}; do
- mkdir "${EXPORTDIR}/arch/os/${dir}" || \
- { echo "MK: 'mkdir ${EXPORTDIR}/arch/os/${dir}' failed"; exit 1; }
- cp -f "${TOPDIR}"/sched/${dir}/*.h "${EXPORTDIR}"/arch/os/${dir}/. 2>/dev/null
- done
- # Add the board library to the list of libraries
- if [ -f "${ARCHDIR}/board/libboard${LIBEXT}" ]; then
- LIBLIST="${LIBLIST} ${ARCHSUBDIR}/board/libboard${LIBEXT}"
- fi
- fi
- LDLIBS=`basename -a ${LIBLIST} | sed -e "s/lib/-l/g" -e "s/\.${LIBEXT:1}//g" | tr "\n" " "`
- if [ "X${USRONLY}" != "Xy" ]; then
- echo "LDLIBS = ${LDLIBS}" >>"${EXPORTDIR}/scripts/Make.defs"
- fi
- # Then process each library
- for lib in ${LIBLIST}; do
- if [ ! -f "${TOPDIR}/${lib}" ]; then
- echo "MK: Library ${TOPDIR}/${lib} does not exist"
- exit 1
- fi
- cp ${TOPDIR}/${lib} ${EXPORTDIR}/libs
- done
- # Process extra librarys
- for lib in ${EXTRA_LIBS}; do
- # Convert library name
- if [ ${lib:0:2} = "-l" ]; then
- lib=`echo "${lib}" | sed -e "s/-l/lib/" -e "s/$/${LIBEXT}/"`
- fi
- for path in ${EXTRA_LIBPATHS}; do
- # Skip the library path options
- if [ ${#path} == 2 ]; then continue; fi
- if [ ${path:0:2} = "-l" ] || [ ${path:0:2} = "-L" ]; then
- path=${path:2}
- fi
- # Export the extra librarys
- if [ -f "${path}/${lib}" ]; then
- cp -a ${path}/${lib} ${EXPORTDIR}/libs
- break
- fi
- done
- done
- # Copy the essential build script file(s)
- cp -f "${TOPDIR}/tools/Config.mk" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/copydir.bat" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/copydir.sh" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/define.bat" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/define.sh" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/incdir.bat" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/incdir.sh" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/link.bat" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/link.sh" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/unlink.bat" "${EXPORTDIR}/tools/"
- cp -f "${TOPDIR}/tools/unlink.sh" "${EXPORTDIR}/tools/"
- # Now tar up the whole export directory
- cd "${TOPDIR}" || \
- { echo "MK: 'cd ${TOPDIR}' failed"; exit 1; }
- if [ -e "${APPDIR}/Makefile" ]; then
- "${MAKE}" -C "${APPDIR}" EXPORTDIR="$(cd "${EXPORTSUBDIR}" ; pwd )" TOPDIR="${TOPDIR}" export || \
- { echo "MK: call make export for APPDIR not supported"; }
- fi
- if [ "X${TGZ}" = "Xy" ]; then
- tar cvf "${EXPORTSUBDIR}.tar" "${EXPORTSUBDIR}" 1>/dev/null
- gzip -f "${EXPORTSUBDIR}.tar"
- else
- zip -r "${EXPORTSUBDIR}.zip" "${EXPORTSUBDIR}" 1>/dev/null
- fi
- # Clean up after ourselves
- rm -rf "${EXPORTSUBDIR}"
|