.. |
Kconfig
|
993321dda6
drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.
|
6 年之前 |
Kconfig-16550
|
ead2c40cd4
Squashed commit of the following:
|
6 年之前 |
Kconfig-lpuart
|
9c1efc7ab9
drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.
|
6 年之前 |
Kconfig-sci
|
9c1efc7ab9
drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.
|
6 年之前 |
Kconfig-uart
|
9c1efc7ab9
drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.
|
6 年之前 |
Kconfig-usart
|
9c1efc7ab9
drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.
|
6 年之前 |
Make.defs
|
5b04c25dcd
drivers/serial/tcdrain: tcdrain() was recently added to the NuttX C library. But there is a problem. The specification of tcdrain() requires that it be a cancellation point. In order to do this, tcdrain was moved from the C library into the OS and the addition cancellation point hooks were added. In non-FLAT builds, access via system calls is also now supported.
|
7 年之前 |
lowconsole.c
|
f8f7b7582c
Silence some warnings
|
8 年之前 |
ptmx.c
|
a7fd58c4db
Squashed commit of the following:
|
6 年之前 |
pty.c
|
3a4984a40b
Rename file_close_detached() to juse file_close() for better consistency in naming.
|
6 年之前 |
pty.h
|
95555a0199
PTY: Add ioctls to support locking and unlocking of the slave. LIBC: Add implementation of unlockpt()
|
8 年之前 |
serial.c
|
993321dda6
drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.
|
6 年之前 |
serial_dma.c
|
993321dda6
drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.
|
6 年之前 |
serial_io.c
|
993321dda6
drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.
|
6 年之前 |
tcdrain.c
|
1567b82429
Make sure that labeling is used consistently in all function headers (part 2).
|
6 年之前 |
uart_16550.c
|
5223d7a391
drivers/serial/uart_16550.c: Remove disabling of interrupts in up_earlyserialinit. up_irqinitialize() already disable all interrupts
|
6 年之前 |