123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703 |
- #
- # For a description of the syntax of this configuration file,
- # see the file kconfig-language.txt in the NuttX tools repository.
- #
- config USART0_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config USART1_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config USART2_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config USART3_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config USART4_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config USART5_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config USART6_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config USART7_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config USART8_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config USART9_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- menu "USART0 Configuration"
- depends on USART0_SERIALDRIVER
- config USART0_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART0_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART0_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART0_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART0_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART0_2STOP
- int "use 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART0_IFLOWCONTROL
- bool "USART0 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART0 RTS flow control
- config USART0_OFLOWCONTROL
- bool "USART0 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART0 CTS flow control
- config USART0_DMA
- bool "USART0 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART0
- endmenu
- menu "USART1 Configuration"
- depends on USART1_SERIALDRIVER
- config USART1_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART1_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART1_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART1_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART1_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART1_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART1_IFLOWCONTROL
- bool "USART1 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART1 RTS flow control
- config USART1_OFLOWCONTROL
- bool "USART1 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART1 CTS flow control
- config USART1_DMA
- bool "USART1 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART1
- endmenu
- menu "USART2 Configuration"
- depends on USART2_SERIALDRIVER
- config USART2_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART2_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART2_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART2_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART2_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART2_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART2_IFLOWCONTROL
- bool "USART2 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART2 RTS flow control
- config USART2_OFLOWCONTROL
- bool "USART2 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART2 CTS flow control
- config USART2_DMA
- bool "USART2 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART2
- endmenu
- menu "USART3 Configuration"
- depends on USART3_SERIALDRIVER
- config USART3_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART3_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART3_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART3_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART3_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART3_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART3_IFLOWCONTROL
- bool "USART3 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART3 RTS flow control
- config USART3_OFLOWCONTROL
- bool "USART3 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART3 CTS flow control
- config USART3_DMA
- bool "USART3 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART3
- endmenu
- menu "USART4 Configuration"
- depends on USART4_SERIALDRIVER
- config USART4_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART4_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART4_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART4_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART4_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART4_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART4_IFLOWCONTROL
- bool "USART4 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART4 RTS flow control
- config USART4_OFLOWCONTROL
- bool "USART4 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART4 CTS flow control
- config USART4_DMA
- bool "USART4 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART4
- endmenu
- menu "USART5 Configuration"
- depends on USART5_SERIALDRIVER
- config USART5_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART5_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART5_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART5_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART5_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART5_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART5_IFLOWCONTROL
- bool "USART5 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART5 RTS flow control
- config USART5_OFLOWCONTROL
- bool "USART5 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART5 CTS flow control
- config USART5_DMA
- bool "USART5 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART5
- endmenu
- menu "USART6 Configuration"
- depends on USART6_SERIALDRIVER
- config USART6_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART6_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART6_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART6_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART6_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART6_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART6_IFLOWCONTROL
- bool "USART6 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART6 RTS flow control
- config USART6_OFLOWCONTROL
- bool "USART6 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART6 CTS flow control
- config USART6_DMA
- bool "USART6 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART6
- endmenu
- menu "USART7 Configuration"
- depends on USART7_SERIALDRIVER
- config USART7_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART7_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART7_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART7_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART7_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART7_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART7_IFLOWCONTROL
- bool "USART7 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART7 RTS flow control
- config USART7_OFLOWCONTROL
- bool "USART7 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART7 CTS flow control
- config USART7_DMA
- bool "USART7 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART7
- endmenu
- menu "USART8 Configuration"
- depends on USART8_SERIALDRIVER
- config USART8_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART8_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART8_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART8_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART8_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART8_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART8_IFLOWCONTROL
- bool "USART8 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART8 RTS flow control
- config USART8_OFLOWCONTROL
- bool "USART8 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART8 CTS flow control
- config USART8_DMA
- bool "USART8 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART8
- endmenu
- menu "USART9 Configuration"
- depends on USART9_SERIALDRIVER
- config USART9_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config USART9_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config USART9_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the USART.
- config USART9_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config USART9_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config USART9_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config USART9_IFLOWCONTROL
- bool "USART9 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable USART9 RTS flow control
- config USART9_OFLOWCONTROL
- bool "USART9 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable USART9 CTS flow control
- config USART9_DMA
- bool "USART9 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on USART9
- endmenu
|