123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639 |
- #
- # For a description of the syntax of this configuration file,
- # see the file kconfig-language.txt in the NuttX tools repository.
- #
- config UART_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config UART0_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config UART1_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config UART2_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config UART3_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config UART4_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config UART5_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config UART6_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config UART7_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- config UART8_SERIALDRIVER
- bool
- default n
- select MCU_SERIAL
- menu "UART0 Configuration"
- depends on UART0_SERIALDRIVER
- config UART0_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config UART0_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config UART0_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the UART.
- config UART0_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config UART0_PARITY
- int "Parity setting"
- range 0 2
- default 0
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config UART0_2STOP
- int "use 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config UART0_IFLOWCONTROL
- bool "UART0 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable UART0 RTS flow control
- config UART0_OFLOWCONTROL
- bool "UART0 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable UART0 CTS flow control
- config UART0_DMA
- bool "UART0 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on UART0
- endmenu
- menu "UART1 Configuration"
- depends on UART1_SERIALDRIVER
- config UART1_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config UART1_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config UART1_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the UART.
- config UART1_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config UART1_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config UART1_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config UART1_IFLOWCONTROL
- bool "UART1 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable UART1 RTS flow control
- config UART1_OFLOWCONTROL
- bool "UART1 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable UART1 CTS flow control
- config UART1_DMA
- bool "UART1 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on UART1
- endmenu
- menu "UART2 Configuration"
- depends on UART2_SERIALDRIVER
- config UART2_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config UART2_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config UART2_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the UART.
- config UART2_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config UART2_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config UART2_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config UART2_IFLOWCONTROL
- bool "UART2 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable UART2 RTS flow control
- config UART2_OFLOWCONTROL
- bool "UART2 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable UART2 CTS flow control
- config UART2_DMA
- bool "UART2 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on UART2
- endmenu
- menu "UART3 Configuration"
- depends on UART3_SERIALDRIVER
- config UART3_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config UART3_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config UART3_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the UART.
- config UART3_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config UART3_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config UART3_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config UART3_IFLOWCONTROL
- bool "UART3 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable UART3 RTS flow control
- config UART3_OFLOWCONTROL
- bool "UART3 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable UART3 CTS flow control
- config UART3_DMA
- bool "UART3 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on UART3
- endmenu
- menu "UART4 Configuration"
- depends on UART4_SERIALDRIVER
- config UART4_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config UART4_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config UART4_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the UART.
- config UART4_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config UART4_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config UART4_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config UART4_IFLOWCONTROL
- bool "UART4 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable UART4 RTS flow control
- config UART4_OFLOWCONTROL
- bool "UART4 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable UART4 CTS flow control
- config UART4_DMA
- bool "UART4 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on UART4
- endmenu
- menu "UART5 Configuration"
- depends on UART5_SERIALDRIVER
- config UART5_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config UART5_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config UART5_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the UART.
- config UART5_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config UART5_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config UART5_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config UART5_IFLOWCONTROL
- bool "UART5 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable UART5 RTS flow control
- config UART5_OFLOWCONTROL
- bool "UART5 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable UART5 CTS flow control
- config UART5_DMA
- bool "UART5 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on UART5
- endmenu
- menu "UART6 Configuration"
- depends on UART6_SERIALDRIVER
- config UART6_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config UART6_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config UART6_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the UART.
- config UART6_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config UART6_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config UART6_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config UART6_IFLOWCONTROL
- bool "UART6 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable UART6 RTS flow control
- config UART6_OFLOWCONTROL
- bool "UART6 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable UART6 CTS flow control
- config UART6_DMA
- bool "UART6 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on UART6
- endmenu
- menu "UART7 Configuration"
- depends on UART7_SERIALDRIVER
- config UART7_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config UART7_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config UART7_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the UART.
- config UART7_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config UART7_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config UART7_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config UART7_IFLOWCONTROL
- bool "UART7 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable UART7 RTS flow control
- config UART7_OFLOWCONTROL
- bool "UART7 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable UART7 CTS flow control
- config UART7_DMA
- bool "UART7 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on UART7
- endmenu
- menu "UART8 Configuration"
- depends on UART8_SERIALDRIVER
- config UART8_RXBUFSIZE
- int "Receive buffer size"
- default 256
- ---help---
- Characters are buffered as they are received. This specifies
- the size of the receive buffer.
- config UART8_TXBUFSIZE
- int "Transmit buffer size"
- default 256
- ---help---
- Characters are buffered before being sent. This specifies
- the size of the transmit buffer.
- config UART8_BAUD
- int "BAUD rate"
- default 115200
- ---help---
- The configured BAUD of the UART.
- config UART8_BITS
- int "Character size"
- default 8
- ---help---
- The number of bits. Must be either 7 or 8.
- config UART8_PARITY
- int "Parity setting"
- default 0
- range 0 2
- ---help---
- 0=no parity, 1=odd parity, 2=even parity
- config UART8_2STOP
- int "Uses 2 stop bits"
- default 0
- ---help---
- 1=Two stop bits
- config UART8_IFLOWCONTROL
- bool "UART8 RTS flow control"
- default n
- select SERIAL_IFLOWCONTROL
- ---help---
- Enable UART8 RTS flow control
- config UART8_OFLOWCONTROL
- bool "UART8 CTS flow control"
- default n
- select SERIAL_OFLOWCONTROL
- ---help---
- Enable UART8 CTS flow control
- config UART8_DMA
- bool "UART8 DMA support"
- default n
- select SERIAL_DMA
- ---help---
- Enable DMA transfers on UART8
- endmenu
|