.. |
drivers
|
c8b1dcc5ab
boards/mips/pic32mx&z/drivers/Kconfig: The drivers folder was one level above where it should be.
|
5 年之前 |
mirtoo
|
5c853cd1dc
libs/libc/unistd/lib_getcwd.c: remove stray sched_unlock(). Also fixes several typos.
|
5 年之前 |
pic32mx-starterkit
|
5995714cfd
boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.
|
5 年之前 |
pic32mx7mmb
|
46aaec7ba0
Fix minor typos in docs and comments.
|
5 年之前 |
sure-pic32mx
|
5995714cfd
boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.
|
5 年之前 |
ubw32
|
5995714cfd
boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.
|
5 年之前 |