码涯-AIGC代码仓库-openoker/NuttX: Nuttx 是一个实时嵌入式操作系统（RTOS）。 @ pr-cmake

Gregory Nutt 5995714cfd boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.		5 年之前
..
Make.defs	66565a69a7 Merged in alinjerpelea/nuttx (pull request #969)	5 年之前
c32-release.ld	5995714cfd boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.	5 年之前
mips-release.ld	5995714cfd boards/mips Linker Scripts: The PIC32M* start-up code initializes .bss by writing 16 bytes at a time in a loop. The start (_sbss) alignment is only required to be 4 bytes since the write is done with 4 store instructions. In a previous change, the end address, _ebss, was aligned to 16 byte to prevent initializing past the end off the .bss region. However, that does not work unless the start address, _sbss, is also aligned to 16 bytes.	5 年之前