/**************************************************************************************
 * drivers/lcd/st7565.h
 *
 * Definitions for the ST7565 128x64 Dot Matrix LCD
 * Driver with C
 *
 *   Copyright (C) 2014 Pierre-noel Bouteville. All rights reserved.
 *   Author: Pierre-noel Boutevlle <pnb990@gmail.com>
 *
 * Based on drivers/lcd/st7567.h
 *   Copyright (C) 2013 Zilogic Systems. All rights reserved.
 *   Author: Manikandan <code@zilogic.com>
 *
 * Based on drivers/lcd/ssd1305.h
 *
 *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * References: SSD1305.pdf, "Solomon Systech SSD1305 136x64 Dot Matrix OLED/PLED
 *             Segment/Common Driver with Controller," Solomon Systech Limited,
 *             http://www.solomon-systech.com, May, 2008.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 **************************************************************************************/

#ifndef __DRIVERS_LCD_ST7565_H
#define __DRIVERS_LCD_ST7565_H

/**************************************************************************************
 * Included Files
 **************************************************************************************/

/**************************************************************************************
 * Pre-processor Definitions
 **************************************************************************************/

/* Fundamental Commands ***************************************************************/

#define ST7565_DISPOFF             0xae /* 0xae: Display OFF (sleep mode) */
#define ST7565_DISPON              0xaf /* 0xaf: Display ON in normal mode */

#define ST7565_SETSTARTLINE        0x40 /* 0x40-7f: Set display start line */
#  define ST7565_STARTLINE_MASK    0x3f

#define ST7565_SETPAGESTART        0xb0 /* 0xb0-b7: Set page start address */
#  define ST7565_PAGESTART_MASK    0x0f

#define ST7565_SETCOLL             0x00 /* 0x00-0x0f: Set lower column address */
#  define ST7565_COLL_MASK         0x0f
#define ST7565_SETCOLH             0x10 /* 0x10-0x1f: Set higher column address */
#  define ST7565_COLH_MASK         0x0f

#define ST7565_ADCNORMAL           0xa0 /* 0xa6: ADC Normal */
#define ST7565_ADCINVERSE          0xa1 /* 0xa7: ADC Inverse */

#define ST7565_DISPNORMAL          0xa6 /* 0xa6: Normal display */
#define ST7565_DISPINVERSE         0xa7 /* 0xa7: Inverse display */

#define ST7565_DISPRAM             0xa4 /* 0xa4: Resume to RAM content display */
#define ST7565_DISPENTIRE          0xa5 /* 0xa5: Entire display ON */

#define ST7565_BIAS_1_9            0xa2 /* 0xa2: Select BIAS setting 1/9 */
#define ST7565_BIAS_1_7            0xa3 /* 0xa3: Select BIAS setting 1/7 */

#define ST7565_ENTER_RMWMODE       0xe0 /* 0xe0: Enter the Read Modify Write mode */
#define ST7565_EXIT_RMWMODE        0xee /* 0xee: Leave the Read Modify Write mode */
#define ST7565_EXIT_SOFTRST        0xe2 /* 0xe2: Software RESET */

#define ST7565_SETCOMNORMAL        0xc0 /* 0xc0: Set COM output direction, normal mode */
#define ST7565_SETCOMREVERSE       0xc8 /* 0xc8: Set COM output direction, reverse mode */

#define ST7565_POWERCTRL_EXT       0x28 /* 0x28: Only the external power supply is used */
#define ST7565_POWERCTRL_VF        0x29 /* 0x29: Only the V/F circuit is used */
#define ST7565_POWERCTRL_VR        0x2b /* 0x2b: Only the voltage regulator circuit and the
                                         * voltage follower circuit are used
                                         */
#define ST7565_POWERCTRL_B         0x2c /* 0x2c: Booster=ON */
#define ST7565_POWERCTRL_BR        0x2e /* 0x2e: Booster=ON V/R=ON */
#define ST7565_POWERCTRL_INT       0x2f /* 0x2f: Only the internal power supply is used */

/* Regulation Resistior ratio V0 = (1+Rb/Ra)*Vev */

#define ST7565_REG_RES_3_0         0x20 /* (Ra/Rb = 3.0) */
#define ST7565_REG_RES_3_5         0x21 /* (Ra/Rb = 5.5) */
#define ST7565_REG_RES_4_0         0x22 /* (Ra/Rb = 4.0) */
#define ST7565_REG_RES_4_5         0x23 /* (Ra/Rb = 4.5) */
#define ST7565_REG_RES_5_0         0x24 /* (Ra/Rb = 5.0) */
#define ST7565_REG_RES_5_5         0x25 /* (Ra/Rb = 5.5) */
#define ST7565_REG_RES_6_0         0x26 /* (Ra/Rb = 6.0) */
#define ST7565_REG_RES_6_5         0x27 /* (Ra/Rb = 6.5) */

/* Set Electronic volume mode */

#define ST7565_SETEVMODE           0x81 /* 0x81: Set contrast control */

/* Set Ev value register
 * ratio Vev = (1-a/162)*Vreg, Vreg = 2.1V
 */

#define ST7565_SETEVREG(x)        (0x0 | ((x) & 0x3F))

/* Set booster ratio */

#define ST7565_MODE_NORMAL         0xac /* Set Normal Mode */
#define ST7565_MODE_SLEEP          0xad /* Set Sleep Mode */

/* Set booster ratio */

#define ST7565_SETBOOSTER          0xf8
#define ST7565_SETBOOSTER4X        0x00 /* x2, x3, x4 */
#define ST7565_SETBOOSTER5X        0x01 /* x5 */
#define ST7565_SETBOOSTER6X        0x02 /* x6 */

#define ST7565_NOP                 0xe3 /* 0xe3: NOP Command for no operation */

/**************************************************************************************
 * Public Data
 **************************************************************************************/

#endif /* __DRIVERS_LCD_ST7565_H */