/**************************************************************************** * Copyright (c) 2010 Broadcom Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * ****************************************************************************/ #ifndef __DRIVERS_WIRELESS_IEEE80211_BCMF_SDIO_REGS_H #define __DRIVERS_WIRELESS_IEEE80211_BCMF_SDIO_REGS_H #define SDIO_FUNC_0 0 #define SDIO_FUNC_1 1 #define SDIO_FUNC_2 2 #define SDIOD_FBR_SIZE 0x100 /* io_en */ #define SDIO_FUNC_ENABLE_1 0x02 #define SDIO_FUNC_ENABLE_2 0x04 /* io_rdys */ #define SDIO_FUNC_READY_1 0x02 #define SDIO_FUNC_READY_2 0x04 /* intr_status */ #define INTR_STATUS_FUNC1 0x2 #define INTR_STATUS_FUNC2 0x4 /* Maximum number of I/O funcs */ #define SDIOD_MAX_IOFUNCS 7 /* mask of register map */ #define REG_F0_REG_MASK 0x7FF #define REG_F1_MISC_MASK 0x1FFFF /* as of sdiod rev 0, supports 3 functions */ #define SBSDIO_NUM_FUNCTION 3 /* function 0 vendor specific CCCR registers */ #define SDIO_CCCR_BRCM_CARDCAP 0xf0 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02 #define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04 #define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC 0x08 #define SDIO_CCCR_BRCM_CARDCTRL 0xf1 #define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET 0x02 #define SDIO_CCCR_BRCM_SEPINT 0xf2 #define SDIO_SEPINT_MASK 0x01 #define SDIO_SEPINT_OE 0x02 #define SDIO_SEPINT_ACT_HI 0x04 /* function 1 miscellaneous registers */ /* sprom command and status */ #define SBSDIO_SPROM_CS 0x10000 /* sprom info register */ #define SBSDIO_SPROM_INFO 0x10001 /* sprom indirect access data byte 0 */ #define SBSDIO_SPROM_DATA_LOW 0x10002 /* sprom indirect access data byte 1 */ #define SBSDIO_SPROM_DATA_HIGH 0x10003 /* sprom indirect access addr byte 0 */ #define SBSDIO_SPROM_ADDR_LOW 0x10004 /* sprom indirect access addr byte 0 */ #define SBSDIO_SPROM_ADDR_HIGH 0x10005 /* xtal_pu (gpio) output */ #define SBSDIO_CHIP_CTRL_DATA 0x10006 /* xtal_pu (gpio) enable */ #define SBSDIO_CHIP_CTRL_EN 0x10007 /* rev < 7, watermark for sdio device */ #define SBSDIO_WATERMARK 0x10008 /* control busy signal generation */ #define SBSDIO_DEVICE_CTL 0x10009 /* SB Address Window Low (b15) */ #define SBSDIO_FUNC1_SBADDRLOW 0x1000A /* SB Address Window Mid (b23:b16) */ #define SBSDIO_FUNC1_SBADDRMID 0x1000B /* SB Address Window High (b31:b24) */ #define SBSDIO_FUNC1_SBADDRHIGH 0x1000C /* Frame Control (frame term/abort) */ #define SBSDIO_FUNC1_FRAMECTRL 0x1000D /* Read Frame Terminate */ #define SFC_RF_TERM (1 << 0) /* Write Frame Terminate */ #define SFC_WF_TERM (1 << 1) /* CRC error for write out of sync */ #define SFC_CRC4WOOS (1 << 2) /* Abort all in-progress frames */ #define SFC_ABORTALL (1 << 3) /* ChipClockCSR (ALP/HT ctl/status) */ #define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E /* Force ALP request to backplane */ #define SBSDIO_FORCE_ALP 0x01 /* Force HT request to backplane */ #define SBSDIO_FORCE_HT 0x02 /* Force ILP request to backplane */ #define SBSDIO_FORCE_ILP 0x04 /* Make ALP ready (power up xtal) */ #define SBSDIO_ALP_AVAIL_REQ 0x08 /* Make HT ready (power up PLL) */ #define SBSDIO_HT_AVAIL_REQ 0x10 /* Squelch clock requests from HW */ #define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 /* Status: ALP is ready */ #define SBSDIO_ALP_AVAIL 0x40 /* Status: HT is ready */ #define SBSDIO_HT_AVAIL 0x80 /* SdioPullUp (on cmd, d0-d2) */ #define SBSDIO_FUNC1_SDIOPULLUP 0x1000F /* Write Frame Byte Count Low */ #define SBSDIO_FUNC1_WFRAMEBCLO 0x10019 /* Write Frame Byte Count High */ #define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A /* Read Frame Byte Count Low */ #define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B /* Read Frame Byte Count High */ #define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C /* MesBusyCtl (rev 11) */ #define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D /* Sdio Core Rev 12 */ #define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E #define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1 #define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT 0 #define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK 0x2 #define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT 1 #define SBSDIO_FUNC1_SLEEPCSR 0x1001F #define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK 0x1 #define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT 0 #define SBSDIO_FUNC1_SLEEPCSR_KSO_EN 1 #define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK 0x2 #define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT 1 #define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL) #define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS) #define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS) #define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval)) #define SBSDIO_CLKAV(regval, alponly) \ (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval))) #define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */ #define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001F /* f1 misc register end */ /* function 1 OCP space */ /* sb offset addr is <= 15 bits, 32k */ #define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF #define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000 /* with b15, maps to 32-bit SB access */ #define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000 /* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */ #define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */ #define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */ #define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */ /* Address bits from SBADDR regs */ #define SBSDIO_SBWINDOW_MASK 0xffff8000 #endif /* __DRIVERS_WIRELESS_IEEE80211_BCMF_SDIO_REGS_H */