/**************************************************************************** * net/icmpv6/icmpv6_radvertise.c * Send an ICMPv6 Router Advertisement * * Copyright (C) 2015, 2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Adapted for NuttX from logic in uIP which also has a BSD-like license: * * Original author Adam Dunkels * Copyright () 2001-2003, Adam Dunkels. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote * products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include "netdev/netdev.h" #include "inet/inet.h" #include "utils/utils.h" #include "icmpv6/icmpv6.h" #ifdef CONFIG_NET_ICMPv6_ROUTER /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define IPv6BUF ((struct ipv6_hdr_s *)&dev->d_buf[NET_LL_HDRLEN(dev)]) #define ICMPv6ADVERTISE \ ((struct icmpv6_router_advertise_s *)&dev->d_buf[NET_LL_HDRLEN(dev) + IPv6_HDRLEN]) /**************************************************************************** * Private Data ****************************************************************************/ #ifdef CONFIG_NET_ICMPv6_ROUTER_MANUAL static const net_ipv6addr_t g_ipv6_prefix = { HTONS(CONFIG_NET_ICMPv6_PREFIX_1), HTONS(CONFIG_NET_ICMPv6_PREFIX_2), HTONS(CONFIG_NET_ICMPv6_PREFIX_3), HTONS(CONFIG_NET_ICMPv6_PREFIX_4), HTONS(CONFIG_NET_ICMPv6_PREFIX_5), HTONS(CONFIG_NET_ICMPv6_PREFIX_6), HTONS(CONFIG_NET_ICMPv6_PREFIX_7), HTONS(CONFIG_NET_ICMPv6_PREFIX_8) }; #endif /* CONFIG_NET_ICMPv6_ROUTER_MANUAL */ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: ipv6addr_mask * * Description: * Copy an IPv6 address under a mask * * Input Parameters: * dest - Location to return the masked address * src - The IPv6 address to mask * maksk - The address mask * * Returned Value: * None * ****************************************************************************/ #ifndef CONFIG_NET_ICMPv6_ROUTER_MANUAL static inline void ipv6addr_mask(FAR uint16_t *dest, FAR const uint16_t *src, FAR const uint16_t *mask) { int i; for (i = 0; i < 8; ++i) { dest[i] = src[i] & mask[i]; } } #endif /* !CONFIG_NET_ICMPv6_ROUTER_MANUAL */ /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: icmpv6_radvertise * * Description: * Send an ICMPv6 Router Advertisement * * Input Parameters: * dev - The device driver structure containing the outgoing ICMPv6 packet * buffer * * Returned Value: * None * * Assumptions: * The network is locked * ****************************************************************************/ void icmpv6_radvertise(FAR struct net_driver_s *dev) { FAR struct ipv6_hdr_s *ipv6 = IPv6BUF; FAR struct icmpv6_router_advertise_s *adv; FAR struct icmpv6_srclladdr_s *srcaddr; FAR struct icmpv6_mtu_s *mtu; FAR struct icmpv6_prefixinfo_s *prefix; uint16_t lladdrsize; uint16_t l3size; /* Set up the IPv6 header */ ipv6->vtc = 0x60; /* Version/traffic class (MS) */ ipv6->tcf = 0; /* Traffic class (LS)/Flow label (MS) */ ipv6->flow = 0; /* Flow label (LS) */ /* Length excludes the IPv6 header */ lladdrsize = netdev_lladdrsize(dev); l3size = sizeof(struct icmpv6_router_advertise_s) + SIZEOF_ICMPV6_SRCLLADDR_S(lladdrsize) + sizeof(struct icmpv6_mtu_s) + sizeof(struct icmpv6_prefixinfo_s); ipv6->len[0] = (l3size >> 8); ipv6->len[1] = (l3size & 0xff); ipv6->proto = IP_PROTO_ICMP6; /* Next header */ ipv6->ttl = 255; /* Hop limit */ /* Swap source for destination IP address, add our source IP address */ net_ipv6addr_copy(ipv6->destipaddr, g_ipv6_allnodes); /* Source IP address must be set to link-local IP */ icmpv6_linkipaddr(dev, ipv6->srcipaddr); /* Set up the ICMPv6 Router Advertise response */ adv = ICMPv6ADVERTISE; adv->type = ICMPV6_ROUTER_ADVERTISE; /* Message type */ adv->code = 0; /* Message qualifier */ adv->hoplimit = 64; /* Current hop limit */ adv->flags = ICMPv6_RADV_FLAG_M; /* Managed address flag. */ adv->lifetime = HTONS(1800); /* Router lifetime */ adv->reachable = 0; /* Reachable time */ adv->retrans = 0; /* Retransmission timer */ /* Set up the source address option */ srcaddr = (FAR struct icmpv6_srclladdr_s *) ((FAR uint8_t *)adv + sizeof(struct icmpv6_router_advertise_s)); srcaddr->opttype = ICMPv6_OPT_SRCLLADDR; srcaddr->optlen = ICMPv6_OPT_OCTECTS(lladdrsize); memcpy(srcaddr->srclladdr, &dev->d_mac, lladdrsize); /* Set up the MTU option */ mtu = (FAR struct icmpv6_mtu_s *) ((FAR uint8_t *)srcaddr + SIZEOF_ICMPV6_SRCLLADDR_S(lladdrsize)); mtu->opttype = ICMPv6_OPT_MTU; mtu->optlen = 1; mtu->reserved = 0; mtu->mtu = HTONL(dev->d_pktsize - dev->d_llhdrlen); /* Set up the prefix option */ prefix = (FAR struct icmpv6_prefixinfo_s *) ((FAR uint8_t *)mtu + sizeof(struct icmpv6_mtu_s)); prefix->opttype = ICMPv6_OPT_PREFIX; prefix->optlen = 4; prefix->flags = ICMPv6_PRFX_FLAG_L | ICMPv6_PRFX_FLAG_A; prefix->vlifetime = HTONL(2592000); prefix->plifetime = HTONL(604800); prefix->reserved[0] = 0; prefix->reserved[1] = 0; #ifdef CONFIG_NET_ICMPv6_ROUTER_MANUAL /* Copy the configured prefex */ prefix->preflen = CONFIG_NET_ICMPv6_PREFLEN; net_ipv6addr_copy(prefix->prefix, g_ipv6_prefix); #else /* Set the prefix and prefix length based on net driver IP and netmask */ prefix->preflen = net_ipv6_mask2pref(dev->d_ipv6netmask); ipv6addr_mask(prefix->prefix, dev->d_ipv6addr, dev->d_ipv6netmask); #endif /* CONFIG_NET_ICMPv6_ROUTER_MANUAL */ /* Calculate the checksum over both the ICMP header and payload */ adv->chksum = 0; adv->chksum = ~icmpv6_chksum(dev, IPv6_HDRLEN); /* Set the size to the size of the IPv6 header and the payload size */ dev->d_len = IPv6_HDRLEN + l3size; ninfo("Outgoing ICMPv6 Router Advertise length: %d (%d)\n", dev->d_len, (ipv6->len[0] << 8) | ipv6->len[1]); #ifdef CONFIG_NET_STATISTICS g_netstats.icmpv6.sent++; g_netstats.ipv6.sent++; #endif } #endif /* CONFIG_NET_ICMPv6_ROUTER */