#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

config UART_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config UART0_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config UART1_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config UART2_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config UART3_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config UART4_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config UART5_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config UART6_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config UART7_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

config UART8_SERIALDRIVER
	bool
	default n
	select MCU_SERIAL

menu "UART0 Configuration"
	depends on UART0_SERIALDRIVER

config UART0_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config UART0_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config UART0_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the UART.

config UART0_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config UART0_PARITY
	int "Parity setting"
	range 0 2
	default 0
	---help---
		0=no parity, 1=odd parity, 2=even parity

config UART0_2STOP
	int "use 2 stop bits"
	default 0
	---help---
		1=Two stop bits

config UART0_IFLOWCONTROL
	bool "UART0 RTS flow control"
	default n
	select SERIAL_IFLOWCONTROL
	---help---
		Enable UART0 RTS flow control

config UART0_OFLOWCONTROL
	bool "UART0 CTS flow control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable UART0 CTS flow control

config UART0_DMA
	bool "UART0 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers on UART0

endmenu

menu "UART1 Configuration"
	depends on UART1_SERIALDRIVER

config UART1_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config UART1_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config UART1_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the UART.

config UART1_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config UART1_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config UART1_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits

config UART1_IFLOWCONTROL
	bool "UART1 RTS flow control"
	default n
	select SERIAL_IFLOWCONTROL
	---help---
		Enable UART1 RTS flow control

config UART1_OFLOWCONTROL
	bool "UART1 CTS flow control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable UART1 CTS flow control

config UART1_DMA
	bool "UART1 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers on UART1

endmenu

menu "UART2 Configuration"
	depends on UART2_SERIALDRIVER

config UART2_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config UART2_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config UART2_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the UART.

config UART2_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config UART2_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config UART2_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits

config UART2_IFLOWCONTROL
	bool "UART2 RTS flow control"
	default n
	select SERIAL_IFLOWCONTROL
	---help---
		Enable UART2 RTS flow control

config UART2_OFLOWCONTROL
	bool "UART2 CTS flow control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable UART2 CTS flow control

config UART2_DMA
	bool "UART2 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers on UART2

endmenu

menu "UART3 Configuration"
	depends on UART3_SERIALDRIVER

config UART3_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config UART3_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config UART3_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the UART.

config UART3_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config UART3_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config UART3_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits

config UART3_IFLOWCONTROL
	bool "UART3 RTS flow control"
	default n
	select SERIAL_IFLOWCONTROL
	---help---
		Enable UART3 RTS flow control

config UART3_OFLOWCONTROL
	bool "UART3 CTS flow control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable UART3 CTS flow control

config UART3_DMA
	bool "UART3 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers on UART3

endmenu

menu "UART4 Configuration"
	depends on UART4_SERIALDRIVER

config UART4_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config UART4_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config UART4_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the UART.

config UART4_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config UART4_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config UART4_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits

config UART4_IFLOWCONTROL
	bool "UART4 RTS flow control"
	default n
	select SERIAL_IFLOWCONTROL
	---help---
		Enable UART4 RTS flow control

config UART4_OFLOWCONTROL
	bool "UART4 CTS flow control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable UART4 CTS flow control

config UART4_DMA
	bool "UART4 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers on UART4

endmenu

menu "UART5 Configuration"
	depends on UART5_SERIALDRIVER

config UART5_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config UART5_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config UART5_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the UART.

config UART5_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config UART5_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config UART5_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits

config UART5_IFLOWCONTROL
	bool "UART5 RTS flow control"
	default n
	select SERIAL_IFLOWCONTROL
	---help---
		Enable UART5 RTS flow control

config UART5_OFLOWCONTROL
	bool "UART5 CTS flow control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable UART5 CTS flow control

config UART5_DMA
	bool "UART5 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers on UART5

endmenu

menu "UART6 Configuration"
	depends on UART6_SERIALDRIVER

config UART6_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config UART6_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config UART6_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the UART.

config UART6_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config UART6_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config UART6_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits

config UART6_IFLOWCONTROL
	bool "UART6 RTS flow control"
	default n
	select SERIAL_IFLOWCONTROL
	---help---
		Enable UART6 RTS flow control

config UART6_OFLOWCONTROL
	bool "UART6 CTS flow control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable UART6 CTS flow control

config UART6_DMA
	bool "UART6 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers on UART6

endmenu

menu "UART7 Configuration"
	depends on UART7_SERIALDRIVER

config UART7_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config UART7_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config UART7_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the UART.

config UART7_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config UART7_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config UART7_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits

config UART7_IFLOWCONTROL
	bool "UART7 RTS flow control"
	default n
	select SERIAL_IFLOWCONTROL
	---help---
		Enable UART7 RTS flow control

config UART7_OFLOWCONTROL
	bool "UART7 CTS flow control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable UART7 CTS flow control

config UART7_DMA
	bool "UART7 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers on UART7

endmenu

menu "UART8 Configuration"
	depends on UART8_SERIALDRIVER

config UART8_RXBUFSIZE
	int "Receive buffer size"
	default 256
	---help---
		Characters are buffered as they are received. This specifies
		the size of the receive buffer.

config UART8_TXBUFSIZE
	int "Transmit buffer size"
	default 256
	---help---
		Characters are buffered before being sent.  This specifies
		the size of the transmit buffer.

config UART8_BAUD
	int "BAUD rate"
	default 115200
	---help---
		The configured BAUD of the UART.

config UART8_BITS
	int "Character size"
	default 8
	---help---
		The number of bits.  Must be either 7 or 8.

config UART8_PARITY
	int "Parity setting"
	default 0
	range 0 2
	---help---
		0=no parity, 1=odd parity, 2=even parity

config UART8_2STOP
	int "Uses 2 stop bits"
	default 0
	---help---
		1=Two stop bits

config UART8_IFLOWCONTROL
	bool "UART8 RTS flow control"
	default n
	select SERIAL_IFLOWCONTROL
	---help---
		Enable UART8 RTS flow control

config UART8_OFLOWCONTROL
	bool "UART8 CTS flow control"
	default n
	select SERIAL_OFLOWCONTROL
	---help---
		Enable UART8 CTS flow control

config UART8_DMA
	bool "UART8 DMA support"
	default n
	select SERIAL_DMA
	---help---
		Enable DMA transfers on UART8

endmenu