 Petro Karashchenko
|
3fa6baec98
spi: change spi_send() interface to support of 32-bit word transfer
|
4 years ago |
|
Xiang Xiao
|
cde88cabcc
Run codespell -w with the latest dictonary again
|
4 years ago |
|
Gregory Nutt
|
53cefb812b
include/nuttx/net/w5500.h: Header file for the WIZnet S5500 Ethernet chip. Still missing register bit definitions. Driver will follow.
|
4 years ago |
|
Gregory Nutt
|
dbd1bb1f1e
All function pointer types should be prefaced by the qualifier CODE (unless the callable function is known to reside in RAM, then it should be FAR).
|
5 years ago |
|
Michael Jung
|
decd07725f
arch/arm/src/stm32/stm32_spi.c: TI Synchronous Serial Frame Format. The SPI macros on STM32 MCUs do support the Texas Instruments Synchronous Serial Frame Format protocol (TI protocol). Defined a new SPIDEV_MODETI and add support for it in stm32_spi.c.
|
5 years ago |
|
Daniel P. Carvalho
|
8578ce9832
include/nuttx/spi/spi.h: Added standard definitions for ADC SPI device ID.
|
5 years ago |
|
Gregory Nutt
|
1fd6c432fc
configs/makerlisp/nsh/defconfig: Enable Procfs, RTC, and SPI-based SD support. Various fixes under arch/z80/src/ez80 for a clean compile.
|
5 years ago |
|
raiden00pl
|
a7d4abd8d2
Merged in raiden00/nuttx_lora (pull request #821)
|
5 years ago |
|
Dave Marples
|
8328539534
drivers/spi/Kconfig and include/nuttx/spi/spi.h: Extend the HW features supported by SPI. It now supports a deffered DMA trigger hardware configuration. arch/arm/src/stm32/stm32_spi.c: Implements the new deferred DMA trigger feature.
|
5 years ago |
|
Gregory Nutt
|
daa3fcc781
include/nuttx/spi/spi.h: Add a definition for a USBHOST SPI device. drivers/usbhost/usbhost_max3421e.c: Review and correct SPI locking usage.
|
6 years ago |
|
Gregory Nutt
|
8f94ce46f9
arch/arm/src/lpc54xx: The basic SPI driver is code complete but still untested. This driver is 'basic' in that in only supports polled mode operations.
|
6 years ago |
|
Jussi Kivilinna
|
05e5841000
include/nuttx/spi/spi/h: Use of argument to SPI_SEND should be within parentheses.
|
7 years ago |
|
Gregory Nutt
|
38ae28e978
MCP2515: Changes from review of last PR
|
7 years ago |
|
Alan Carvalho de Assis
|
001919ffe9
Add CANBUS SPIDEV definition
|
7 years ago |
|
Gregory Nutt
|
84c887f48c
Update a README and some comments.
|
7 years ago |
|
Gregory Nutt
|
e9a5477506
Add an instance argument to the SPIDEV definitions.
|
7 years ago |
|
Gregory Nutt
|
73c78fb690
spi.h edited online with Bitbucket
|
7 years ago |
|
Gregory Nutt
|
bfc1b0a557
I am not sure why spi.h is still generating warnings. A few more parentheses and that seems to fix the problem
|
7 years ago |
|
Gregory Nutt
|
11e15edfdf
Change to spi.h to follow coding standard
|
7 years ago |
|
Gregory Nutt
|
90db11494e
spi.h: Eliminate a warning
|
7 years ago |
|
Sebastien Lorquet
|
faeef8e700
Make value an uint32 before shifting 16 places left
|
7 years ago |
|
Sebastien Lorquet
|
401caf6826
add main includes
|
7 years ago |
|
Sebastien Lorquet
|
c025ffc3c3
contactless: spi device
|
8 years ago |
|
Gregory Nutt
|
6df28bc74e
Make bit-order SPI H/W feature configurable for better error detection
|
8 years ago |
|
Gregory Nutt
|
c3cfd37791
Fix cloned variable error in all SPI drivers
|
8 years ago |
|
Gregory Nutt
|
7d4cb73bd6
STM32 and EFM32 SPI drivers adopted an incompatible conventions somewhere along the line. The set the number of bits to negative when calling SPI_SETBITS which had the magical side-effect of setting LSB first order of bit transmission. This is not only a hokey way to pass control information but is supported by no other SPI drivers.
|
8 years ago |
|
Gregory Nutt
|
7da67bc80a
drivers/spi: Add a helper function that encapsulates and manages a sequency of SPI transfers.
|
8 years ago |
|
Frank Benkert
|
573b1d415c
* SAMV7: SPI: SPI-Freq. 40MHz; VARSELECT; hw-features
|
8 years ago |
|
Sebastien Lorquet
|
dc7adfa817
drivers/wireless/ieee802154/Kconfig
|
8 years ago |
|
Gregory Nutt
|
fd896330d8
Remove the final vestiges of up_spiinitialize()
|
8 years ago |
