Nobuto Kobayashi
|
2a555d1165
configs/spresense: Add Spresense board support.
|
5 years ago |
Gregory Nutt
|
713a560497
Upate README documents
|
5 years ago |
Gregory Nutt
|
7f11a45895
Update README files.
|
5 years ago |
Gregory Nutt
|
f41b9fead9
arch/arm/src/tiva/cc13xx: The trim files from the TI DriverLib now compile successfully. This merge also brings in the ROM files from the TI DriverLib which do NOT year compile correctly. This is still a work in progress. There merge also adds unverified support for the LaunchXL-CC1310.
|
5 years ago |
Gregory Nutt
|
96d638d277
Update README files.
|
5 years ago |
Gregory Nutt
|
f50ff84510
configs/pizero: Remove the partial support for the Raspberry Pi Zero. This port was started with the best of intentions but was never completed. The board support can still be found in the Obsoleted repository.
|
5 years ago |
Daniel Agar
|
e36f81bd94
Merged in dagar/nuttx/pr-README_typo (pull request #797)
|
5 years ago |
Gregory Nutt
|
a641cb2ad8
configs/launchxl-cc1312r1/: Add a configuration for the LAUNCHXL-CC1312R1 board. This is a very stripped down configuration. It was needed to support verifiction of the CC13xx configuration logic and will be needed to support completion of the CC13xx port.
|
5 years ago |
Matous Pokorny
|
7a4fb66192
Merged in ehiker/nuttx/fix_readme_typo (pull request #764)
|
6 years ago |
Zou Hanya
|
74cd8a53d5
Squashed commit of the following:
|
6 years ago |
Gregory Nutt
|
61fd244fd3
Add support for the Maxim Integrated MAX32660-EVSYS board.
|
6 years ago |
Koichi.Okamoto@sony.com
|
5f09e6fd04
Merged in OkamotoKoichi/nuttx/improve_nuttx_readmetxt (pull request #749)
|
6 years ago |
Gregory Nutt
|
e4562fc538
This commit brings in support for the GAP8 architecture. The GAP8 is a 1+8-core DSP-like RISC-V MCU. Also included is support for the Gapuino GAP8 evaluation board.
|
6 years ago |
Gregory Nutt
|
986bbf3ae7
configs/pcblogic-pic32mx: Remove support for the PCB Logic PIC32MX board. I do not find any references to PCB Logic on the web and I do not believe that this breakout board is available any longer.
|
6 years ago |
Gregory Nutt
|
b4488a0549
fs/spiffs: Fix an error in write operation. examples/fstest now gets further before errors occur, but still does not work correctly.
|
6 years ago |
Gregory Nutt
|
ec498d2660
This commit brings in an inital port of the SPIFFS flash file system into NuttX. The file system is still untested at this point (and subject to some additional review). It is, however, marked EXPERIMENTAL should this should not cause a problem for anyone.
|
6 years ago |
Gregory Nutt
|
bbad69ab61
Change all occurrences of CONFIG_EXAMPLES_NSH* to CONFIG_SYSTEM_NSH* to match changes in the apps/ directory.
|
6 years ago |
Gregory Nutt
|
81c6bda341
Update README files
|
6 years ago |
Gregory Nutt
|
8d68d9ca43
arch/arm/src/stm32, stm32f7, stm32l4, and related defconfig files: The STM32 RTC driver was being selected by the global CONFIG_RTC option. That is in correct. For example, if you want to disabled the STM32 RTC and use an external RTC you cannot because the external RTC also depends on the global CONFIG_RTC. The solution is to add a new CONFIG_STM32xx_RTC configuration option the permits to you select or deselect the STM32 RTC but still be able to selecte the external RTC.
|
6 years ago |
Gregory Nutt
|
4becaea8e3
This commit extends support for the two-pass build. Its primary purpose is to incorporate source logic generated by applications into the kernel phase of the build.
|
6 years ago |
Gregory Nutt
|
a9d713bbcc
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic.
|
6 years ago |
Gregory Nutt
|
a1cddfbc8c
Update READMEs
|
6 years ago |
Juho Valkama
|
0eff3d530f
Merged in jutava/nuttx (pull request #673)
|
6 years ago |
Gregory Nutt
|
80f4f1fab8
configs/pcblogic-pic32mx, sure-pic32mx, ubw32: Update configurations so that the MIPs or Penguino toolchains may be used.
|
6 years ago |
Gregory Nutt
|
31ea6ec910
Update tools/link.sh per suggestions by Mark so that it can be used with MSYS vs copydir.sh.
|
6 years ago |
Gregory Nutt
|
d52c63f632
Change all references from OSX to macOS
|
6 years ago |
Gregory Nutt
|
6a55b471da
Trivial README update
|
6 years ago |
Gregory Nutt
|
a5e4508a95
Makefile: The clean_context target needs to invoke a corresponding clean_context target in the apps/Makefile in order to remove linkages
|
6 years ago |
Gregory Nutt
|
de119e8589
Various fixes necessary to build the simulator under MSYS.
|
6 years ago |
Gregory Nutt
|
3146eb5d63
tools/: Update to better support MSYS
|
6 years ago |